Home › Forex › Forex strategies
Forex strategies: how they are planned and measured
A forex strategy is a set of written rules that define which pairs you trade, at what times, by what criteria you enter, where you place the stop, how much you risk and in which situations you do not trade. It does not predict the market: it narrows down decisions so that the result depends on a repeatable process and not on the impulse of the moment. The real difference with synthetic indices is not in the entry, but in the context: forex is a decentralised market, with sessions, changing liquidity and costs that are not always visible on screen.
What you need to understand before trading
Forex is the currency market: you trade a currency pair, where the price indicates how many units of the quote currency one unit of the base currency costs. In the EUR/USD pair, if it quotes at 1.0800, one euro is worth 1.0800 dollars. Buying the pair is betting on the base currency; selling it, on the quote currency.
Three mechanical concepts that are worth being clear about before designing anything:
- Pip: the minimum unit of price movement. In most pairs it is 0.0001; in those that include the yen, 0.01.
- Lot: the size of the trade. A standard lot is 100,000 units of the base currency; there are mini lots (10,000) and micro lots (1,000).
- Spread and swap: the spread is the difference between the buy price and the sell price, and it is your immediate entry cost. The swap is the interest paid or received for holding an open position overnight.
Forex is an over-the-counter (OTC) market: there is no central exchange setting a single price, but rather a network of brokers and banks. That means that the price and the spread vary between providers, and that there is no "official price" for the euro. It also means that it opens from Monday to Friday and closes at the weekend, with the gap that this can leave on the chart on Sunday night.
On forex leverage: it allows you to open positions larger than the deposited capital. In accounts regulated in Europe, the retail limit is usually 1:30 for major pairs, while offshore brokers offer much higher figures. Higher leverage does not increase your risk per trade if you calculate the size based on the stop: it only reduces the margin your broker retains. Risk is defined by the position size and the distance to the stop, not by the multiplier.
If you are starting from scratch, in what is forex you have the full glossary, and the forex hub brings together the pairs and their particularities.
How it works in practice
A forex trading strategy that works comes down to five steps that are repeated in the same way every time:
- You filter the context: is there a trend or a range? Is there imminent macro news?
- You define the entry with an objective condition (a level, a candle close, a breakout).
- You place the stop at the point where your idea no longer makes sense, not where it feels comfortable.
- You calculate the position size from that stop and your maximum risk.
- You manage it: a defined target or an exit by rule, and a record of the trade.
A forex strategy for beginners should be boring: one pair or two, a single trading idea, a specific time slot and small risk. Adding indicators or pairs does not improve the process; it makes it harder to measure.
Sessions and times
Forex does not have a single session: it has three large overlapping blocks. Approximate times in Spanish mainland time (they vary with the change of clocks):
| Session | Approximate time (CET) | Practical feature |
|---|---|---|
| Tokyo / Asia | 01:00 – 10:00 | Narrower ranges; drives AUD, NZD and JPY |
| London | 09:00 – 18:00 | Highest volume of the day; tighter spread |
| New York | 14:00 – 23:00 | Strong in USD; the overlap with London concentrates liquidity |
| London–New York overlap | 14:00 – 18:00 | Time of greatest activity and also the most noise |
Each pair has its natural session. EUR/USD moves mainly with London and New York; USD/JPY with Asia and the European open. Trading a pair outside its time slot usually means wider spreads and less clean moves.
From the spread to the real cost in R
Work in R: R is the money you risk on a specific trade. If you risk 10 euros, 1R = 10 euros. Expressing costs in R lets you compare them with what you expect to earn.
The entry cost is the spread in pips multiplied by the pip value of your position size. To that you add the broker's commission, if any, and the swap if you hold the position beyond the daily close. Example: if your 1R is 10 euros and the spread on the trade costs you 1 euro, that cost is 0.1R. It is not dramatic, but it means the trade starts 10% of R against you before it moves. With very tight stops and spreads that widen on news or at rollover, that percentage can eat into a relevant part of the expected profit.
The swap accumulates every day; in many pairs it is slightly negative for the long side and in some it can be positive. It depends on the pair, the broker and the interest rate of each currency, so check it in the instrument details: it is not a fixed or universal figure.
How risk per trade is calculated
The formula is simple and does not change:
Lots = (capital × % risk) ÷ (stop in pips × pip value per lot)
The risk percentage is a convention, not a law: 1% per trade is a common starting point for beginners, because it lets you go through a losing streak without destroying the account. What matters is that it is a number decided before you look at the chart.
Numerical example with a 1,000 account
1,000-euro account, 1% risk → 10 euros per trade.
- Pair: EUR/USD. Stop: 20 pips.
- You need 20 pips to equal 10 euros, that is, 0.50 euros per pip.
- In a standard lot the pip is worth about 10 dollars; in a micro lot (0.01), about 0.10. For 0.50 per pip you need 0.05 lots (5,000 units).
- Check: 20 pips × 0.50 = 10 euros maximum loss if the stop is hit.
- Margin held: 5,000 units at 1.0800 is 5,400 dollars notional; with 1:30 leverage, about 180 dollars of margin.
- Spread cost: if the spread is 1 pip, with 0.05 lots it is 0.50 euros, that is 0.05R.
Note the effect of the stop: if instead of 20 pips it were 60, the size would fall to about 0.016 lots. The risk in euros does not change; the size changes. That is the mechanism you should automate mentally before trading live.
Typical mistakes when coming from synthetics
Synthetic indices are markets created by the broker: they trade 24/7, have no swap, their volatility is defined by the provider and they do not close at the weekend. Applying that logic to forex leads to specific mistakes:
- Trading at any time. With synthetics, the spread and behaviour are relatively stable at 3 a.m. In forex, at that time EUR/USD moves little and the spread weighs more heavily.
- Ignoring the real cost. With synthetics, the cost is practically limited to the spread; in forex, there is commission on many accounts and swap for holding a position. A strategy that was marginal with synthetics can become a losing one purely because of costs.
- Reusing the position size. The value of a pip changes with the pair and with the lot. A size that worked on a synthetic does not mean the same thing on EUR/USD.
- Not checking the calendar. Interest rates, employment data and central bank speeches move the price sharply. And the market closes on Friday night: Monday can open with a gap.
- Confusing controlled volatility with real volatility. Synthetics have characteristic ranges and jumps; forex responds to macro flows and to the prevailing liquidity.
- Using leverage as a plan. Just because the broker lets you open 1 lot with 1,000 euros does not mean it is consistent with risking 1%.
- Not adapting your routine. If your sleep schedule clashes with the London session, your strategy needs another time slot, not more caffeine.
Learning this takes time and repetition: a demo account, a trading journal with the cost in R noted down and a weekly review. In the forex course we work on that foundation with position-sizing exercises and sessions, without promising results.
Frequently asked questions
When is liquidity highest?
In the overlap between the London and New York sessions, approximately between 14:00 and 18:00 Spanish mainland time (times shift with daylight saving). That is where the day's greatest volume is concentrated and the spread tends to be tighter. The London open also has good liquidity. The least liquid moments are the New York close and the deep Asian session, as well as Friday afternoon. Note: more liquidity does not mean better results, because macro data is also published during that overlap and the noise increases.
How much does a pip cost?
A pip is a unit of price, not of money: its monetary value depends on the position size and the pair. In EUR/USD, a pip is worth approximately 0.10 dollars with 0.01 lots, 1 dollar with 0.10 lots and 10 dollars with 1 standard lot. In pairs with the yen the calculation changes because a pip is 0.01 and not 0.0001, and in pairs where the dollar is not the quote currency the value is converted at the exchange rate. What you pay to trade is the spread: if the spread is 1.2 pips, multiply that pip value by 1.2.
Is forex better than synthetics?
There is no single answer; it depends on what you need. Forex is a real, huge and decentralised market, with defined hours, financing costs and weekend gaps. Synthetics are broker products: they trade 24/7, have no swap, their volatility is set by the provider and they do not depend on the real economy, which makes it easier to compare and automate rules, but also means that the market is made by a single counterparty. Many traders use synthetics to practise sizing and forex to trade in a market with more depth. The sensible approach is to choose according to your schedule, your tolerance for costs and what you can measure with your own data.
Forex with risk management
Sessions, costs and position size explained as they apply in a real account.
Keep reading
- What forex is and how it works: a clear guide
- Forex course: position calculation and examples
- Forex trading: what it is and how to trade it
- EURUSD: how to trade the most traded pair