Home › Volatile instruments › How to trade the Crash 1000 index
How to trade Crash 1000 index: what it is and how to trade it
Trading the Crash 1000 means taking exposure to a synthetic index that rises slowly and drops sharply, so the critical decision is not where you enter, but how many lots you enter with and how much you can lose on the peak tick. It is traded as an OTC derivative on MetaTrader, with tick, spread and contract size defined in the symbol specification, and with a slippage that appears just when it matters most. Everything else —direction, indicators, timing— is secondary to that.
What it is and who publishes it
Crash 1000 is a synthetic index: its price does not replicate any real asset, any future or any basket of shares. It is generated by an algorithm running on the provider's servers and distributed to the broker, which in turn publishes it on your platform. The best-known provider in this family is Deriv, responsible for the boom and crash (Boom 300/500/1000 and Crash 300/500/1000), although other brokers market equivalent products under their own names.
Practical implications of its synthetic nature:
- There is no underlying asset, no exchange, no session close and no opening gaps.
- It trades 24/7, including weekends, and does not react to macro news.
- Its behaviour is defined by the provider: the price distribution is what it is, and you are not going to “interpret” it with fundamental analysis.
It is executed as a CFD on MT4/MT5 or in the broker's app. Before the first order, the specification window symbol specification is mandatory reading. You have an overview of the range at /instrumentos/ and the specific page at /crash-1000-index/ y /instrumentos/crash-1000/.
A note on naming: if you have arrived looking for the “crash 50 index”, the most widespread commercial numbering in this family is 300, 500 and 1000. If your broker offers another variant, do not assume it behaves the same simply because of the name: the frequency of the spikes changes and the contract size may change too.
How the price behaves
Crash 1000 alternates between two very different regimes:
- Slow drift, which takes up most of the time and has an upward bias.
- Spike, a violent, sudden drop that takes the price much lower in just a few ticks.
The number in the name is used as a reference for the average frequency of these spikes, measured in ticks: the higher the number, the less frequent the spikes on average. It is not a timer. That the last spike was a long time ago does not bring the next one any closer, and that it was one tick ago does not push it any further away.
In the family Crash Boom indices the behaviour is the same pattern with a different frequency and a different typical spike range:
| Instrument | Price bias | Spikes | What to look for in the specification |
|---|---|---|---|
| Crash 300 | Upward drift, downward spikes | The most frequent in the family | Average spike range and spread during the spike |
| Crash 500 | Same | Intermediate frequency | Same |
| Crash 1000 | Same | The least frequent | Long runs without spikes |
| Boom 1000 | Mirror image: downward drift, upward spikes | Equivalent to Crash 1000 | A short here is the position exposed to the spike |
| Step Index 200 | No directional bias; it moves in steps | There are no spikes | Useful contrast: continuous volatility, not concentrated |
The step index 200 is a good comparison point: there, volatility is spread much more evenly, whereas in boom and crash it is concentrated at a specific moment. You can see it in /instrumentos/step-index/.
The trap of the smooth trend
Open a one-minute chart and you will see an orderly, almost boring upward channel. That is where the problem begins, in three ways:
- Reinforcement by long runs. Hours or days pass without spikes and the subconscious concludes that “this isn’t moving”. Tight stops seem to work because they haven’t been tested yet.
- Selling against the drift because “it’s too high”. The drift has no memory: having risen for three days does not increase the probability of a spike on the next tick. A short on Crash makes ticks little by little and loses a lot all at once; if the spike doesn’t arrive within your time window, the position eats up the move through sheer accumulation.
- Buying with the trend and forgetting the stop. The spike gives back weeks of gains in an instant, and the mental stop doesn’t execute anything.
The correct reading of a smooth chart is that you are seeing the calm part of a fat-tailed distribution, not the absence of risk.
Volatility and cost: what the contract says
Here volatility is not an abstract word: it is measured in ticks travelled per unit of time, and in the Crash 1000 it is concentrated in the spike. That changes how you should read the costs:
- Spread. Difference between buy and sell; you pay it on entry and exit. On synthetics it is usually fixed under normal conditions, but don’t take it for granted: check the typical spread and the one that appears on the spike tick.
- Slippage. Your order may be filled at a worse price than requested. In the spike, a stop placed 10 ticks away can cost you 30. It is the most underestimated cost.
- Tick. Minimum unit of movement. Its monetary value per lot is the piece that turns distance into money.
- Symbol specification. There you will find contract size, minimum and maximum lot, tick value, spread, required margin and trading hours. Read it before calculating, not after the loss.
How to calculate position size
The formula is simple and does not depend on your opinion about the direction:
Risk in money = (distance to the stop in ticks) × (tick value per lot) × lots
Solving: lots = allowed risk ÷ (ticks to the stop × tick value per lot).
Numerical example with a 1,000 account
Assumptions, and a note that they are illustrative: a 1,000 account, maximum risk of 1% per trade (10), a stop at 200 ticks and a tick value of 0.10 per lot. Replace those last two figures with those of your actual symbol before trading.
lots = 10 ÷ (200 × 0.10) = 0.50 lots
With a minimum lot of 0.10, the effect of moving the stop is this:
| Distance to the stop | Calculated lots | Executable lots | Actual risk |
|---|---|---|---|
| 100 ticks | 1,00 | 1,00 | 10 |
| 200 ticks | 0,50 | 0,50 | 10 |
| 400 ticks | 0,25 | 0,25 | 10 |
| 800 ticks | 0,125 | 0,10 | 8 (below plan) |
Two readings. First: if the calculated lot falls below the minimum, you cannot execute your risk plan as it stands; you will have to give up the trade or take on more risk than planned. Second: shortening the stop does not reduce the monetary risk if you keep 1 %; it only spreads the same potential loss across fewer ticks, which raises the probability of the spike stopping you out prematurely.
Typical mistakes with this instrument
- Treating the average frequency as a countdown. “It’s due a spike” is not a trading rationale.
- Tight stop on the spike side. The spike sweeps the stop and then the drift continues; you’re out with the loss.
- Calculating risk without slippage. In Crash 1000, the stop is not always executed where you placed it.
- Confusing lots with conviction. Increasing size to recover a loss is the fastest route to blowing the account.
- Importing forex rules. Sessions, news and schedules do not apply to a synthetic that trades 24/7.
- Assuming Boom is “the same in reverse”. The bias of your position changes completely: in Boom the spike goes against the short.
- Not checking the specification when changing broker. The same name can have a different contract, a different minimum lot and a different spread.
Frequently asked questions
How do you copy a trade in MT4?
MT4 does not include native trade copying: it is done with local copy tools or with copy/social trading services offered by the broker or an external provider. Before using them, check that the symbol is tradeable in both accounts and that the size is recalculated according to your balance; copying the lot as it is can multiply your risk. Also assume that the slippage and spread of your account will not be identical to those of the original trade.
How do you copy a trade?
With a copy tool (local, on the same platform, or via a social trading service). What matters is not the mechanism but the sizing: the copied trade must fit your account, your stop and your loss tolerance, not the lot of the trade that originated it. And verify the symbol specification with your broker: the same name can have a different contract and spread.
What is the minimum lot?
There is no universal minimum: it is set by the broker and appears in the symbol specification, alongside the contract size and tick value. If the lot required by your calculation
Trading with the correct size
Each instrument has its own volatility and point value: the lot is calculated, not copied from a video.
Read on
- Synthetic instruments: fact sheets by index | Synthetics
- Crash 1000 index: what it is and how to trade it
- What Crash 1000 is: how many ticks between drops and how to trade it
- What the Step Index is: fixed steps and how to trade it