Home › Forex › Lot size and risk per trade in forex

Lot size and risk per trade in forex: a practical guide

By Luis Sanches y Milton Bertillo, mentors at SHEFA Trading Academy · Updated on 10 November 2026 · Reading time: 8 min

Lot size and risk per trade in forex follow the same logic: first you decide how much money in your account you can lose on that trade (usually 1%), then where the stop goes according to the chart, and only at the end does the position size come out. Lot size is the result of the calculation, never the starting point. If you reverse the order, leverage will make sure that a reasonable trade turns into a loss you cannot recover from.

What you need to understand before trading

Before touching position size, there are five pieces worth getting clear. If you come from another market, most mistakes start here.

A currency pair is simply the price of one currency expressed in another: EUR/USD shows how many dollars one euro costs. If you buy the pair, you buy euros and sell dollars. That detail matters because the value of your profits and losses is measured in the quote currency, and then converted to your account currency. You can build on the basics in what is forex.

A pip is the smallest unit of price movement used to measure distances: 0.0001 in most pairs and 0.01 in those quoted against the Japanese yen. A pip is not money; it is a distance. What is worth money is how much your position moves when the price travels one pip.

A lot is the position size, measured in units of the base currency:

SizeUnits of base currencyIndicative pip value in EUR/USD (USD account)
Standard lot100.00010 USD
Mini lot10.0001 USD
Micro lot1.0000.10 USD

Those values are indicative: the exact pip value depends on the pair and your account currency. In USD/JPY, one pip per standard lot is around 1,000 JPY, which in a dollar account is around 6-7 USD depending on the exchange rate at the time. That is why you cannot memorise a figure and apply it to everything.

The leverage in forex is the ease with which you can open positions larger than your capital by depositing only a margin. In retail accounts regulated in the European Union it is usually limited, typically to 1:30 for major pairs. Its function is to free up margin, not to increase your risk: risk is defined by the distance to the stop multiplied by the position size. You can have 1:30 and still ruin yourself if the lot size has nothing to do with your account.

And two costs you do not see in other markets: the spread (the difference between the buy price and the sell price, which you pay when opening) and the swap (daily interest for keeping the position open when crossing the rollover time, which can add or subtract depending on the interest rates of the two currencies).

How it works in practice

Sessions and hours

Forex has no central market or single schedule: it is a decentralised market that moves following the sessions of the major financial centres. As a guide, in Spanish mainland time in winter: Tokyo roughly 01:00 to 10:00, London 09:00 to 18:00 and New York 14:00 to 23:00. When the clocks change, everything shifts by one hour.

What matters for your trading is that liquidity is not constant. In the overlap between London and New York, around 14:00 to 18:00, the day's highest volume is concentrated: the spread tightens and the price moves more continuously. At the extremes —the end of the US session, Friday afternoon, the Sunday open— the spread widens and gaps appear. The swap is applied when crossing rollover, at around 23:00-00:00 mainland Spain time.

From spread to real cost in R

Here is the difference between "trading" and "measuring what it costs to trade". Define R as the risk you take on a trade: if you risk 10 USD, 1R = 10 USD.

The spread cost, expressed in R, is simply:

cost in R = spread in pips ÷ stop distance in pips

With a 20-pip stop and a 1.2-pip spread, the spread takes 0.06R. That seems little, but if your system earns an average of 1.5R per trade, you are giving up 4% of the gross result on each entry, and considerably more if you trade during wide-spread hours. A spread that doubles at the session close becomes 0.12R without you having changed anything in your strategy.

The swap works differently: it is not paid on opening, it accrues for every night you hold the position. In intraday trading it barely exists; in multi-day trades it can weigh more than the spread, especially if you trade the side of the currency with the lower interest rate. If you swing trade, the swap is part of the risk calculation just like the stop.

How risk per trade is calculated

The procedure is always the same, in this order:

  1. Risk in money: capital × risk percentage. 1% per trade is the usual reference because it allows you to string together a losing streak without blowing the account.
  2. Stop distance in pips: it is set by the chart and the pair's volatility, not by the desire to use a particular lot size.
  3. Pip value per lot of the pair you are going to trade, in your account currency.
  4. Lots = risk in money ÷ (stop in pips × pip value per lot).

Numerical example with a 1,000 account

1,000 USD account, 1% risk → 10 USD per trade. You trade EUR/USD and the stop is at 20 pips.

Lots = 10 ÷ (20 × 10) = 0.05 lots, that is, 5.000 units. Check: 20 pips × 0,50 USD per pip = 10 USD. The margin required with 1:30 is around 180 USD, but your real risk remains 10 USD, 1 % of the account.

The same account, same risk, different stops:

Stop (pips, EUR/USD)Risk takenPosition size
1010 USD0.10 lots
2010 USD0.05 lots
5010 USD0.02 lots
10010 USD0.01 lots

Notice what this means: the wider the stop, the smaller the position must be. And vice versa. If in that same example you opened 0.50 lots with a 20-pip stop, you would be risking 100 USD, 10% of the account in a single trade. Five of those and no account can withstand it.

Typical mistakes when coming from synthetics

The first and most expensive: carrying over fixed lot sizes. In synthetics the pip value per lot is usually constant and similar across assets, so you get used to 0.10 lots always "costing" the same. In forex it does not: 0.10 lots on EUR/USD and 0.10 lots on GBP/JPY are different risks, and in yen pairs the pip is measured at the second decimal place.

The second: assuming the market is always the same. Synthetics trade continuously and with relatively stable spreads. Forex breathes by sessions, opens with gaps on Sunday and its spread widens on every relevant macro release. Trading the same at 15:00 as at 22:30 is a calculation error, not a matter of opinion.

The third: ignoring the calendar. In forex, inflation and employment data and interest rate decisions move the price within seconds, with execution slippage. You do not need to be a macro expert, but you do need to know when there is an event and decide whether you are in or out.

The fourth: not counting the swap, because it does not exist in synthetics. The fifth: confusing leverage with position size, which is the quick route to a lot that bears no relation to your account. And the sixth: measuring results in money or in pips instead of in R, which prevents you from comparing trades with each other.

If you come from there, the transition is not solved with more indicators but with a risk calculator, a trade log and discipline. At SHEFA Trading Academy, lot calculation is worked on from day one, and if you are looking for a forex trading course or simply how to learn trading forex in an orderly way, the starting point is this, not the lot. You have the full approach in the forex course and, once the calculation is automatic, the next step is the forex strategies: adapting risk to each one, not the other way round.

Frequently asked questions

When is there more liquidity?

In the overlap between the London and New York sessions, roughly between 14:00 and 18:00 Spanish mainland time in winter (one hour earlier in summer). It is the period with the highest volume, tighter spreads and more continuous moves. The London session on its own is also good. It is best to avoid the end of the US session, Friday afternoon and the first few minutes after a macro release, when the spread widens and execution can slip.

How much does a pip cost?

A pip costs nothing in itself: it is a unit of price distance. What you pay is the spread, which is measured in pips. On EUR/USD with a spread of 1.2 pips and a position of 0.05 lots, that cost is 0.60 USD; if your risk per trade is 10 USD, it is equivalent to 0.06R. In a standard lot the same pip is worth 10 USD. In pairs with the yen the pip is 0.01 and its value in your account currency changes with the exchange rate, so you have to calculate it on every trade.

Is forex better than synthetics?

Neither is better in the abstract: they are different markets with different rules. Forex is a decentralised, highly liquid market, organised by sessions, with spread and swap, and sensitive to macroeconomic data. Synthetics are products created by the broker, with broader hours and their own conditions. Which one fits depends on your strategy, your schedule and how well you tolerate weekend gaps. What does change objectively is the calculation: in forex you cannot assume a fixed pip value per lot, and swap exists. Neither offers guaranteed results; the difference is made by your risk management.

Forex with risk management

Sessions, costs and position size explained as they apply in a real account.

Forex guides →

Keep reading

Risk warning. Synthetic indices and CFDs are leveraged products with a high risk of loss; most retail accounts lose money. Educational content, not financial advice.